Hey, no offense, but your swim spa cover smells bad. Perhaps you’ve gotten used to it?
Don’t worry, it happens to all spa owners at one time or another; water is among nature’s most erosive substances. Moisture leaks in and becomes trapped between the outer vinyl shell and the cling wrap foam cores. The warm, moist environment is best for mold and mildew and other kinds of smelly stuff.
If moisture has actually penetrated even more into the plastic wrapped foam core, the cover ends up being waterlogged, which can rapidly grow all sorts of dark and stinky slime, but likewise make the cover actually tough to eliminate, and not as effective at keeping the heat in the spa. Time for a much better kind of swim spa cover.
Smelly Swim Spa Cover?!?
• Broken or damaged. Cracked foam cores, ripped or worn spots, torn seams. A spa cover that loses it’s arched roofing system line, to keep water draining pipes off correctly, will eventually begin to puddle water, which is most likely time to purchase a brand-new swim spa cover! A spa cover with threadbare areas in the vinyl is also bad news, and although you can stave off the inevitable with a duct tape repair work, the water will win, ultimately.
• Not Removed Regularly. Eliminate your spa cover weekly for 2 hours of airing out. A better cover can withstand longer durations, but it’s a good practice to eliminate the cover and let it get some air on a weekly basis. If you can quickly open the zipper to permit moisture to get away do so, but don’t get rid of delicate foam panels unless absolutely required.
• Poorly Made. It’s easy to make a swim spa cover with tape and staples, but it won’t stop moisture extremely well. Even the very best foam filled covers with vacuum-wrapped and heat welded seam are not going to keep the intense moisture from your spa from reaching the foam core. The only genuine service is a swim spa cover utilizes air to insulate instead of foam.
• Bad Spa Water. If the spa water is not maintained routinely with sanitizer and filtering, or is not shocked typically enough, germs and algae can benefit from a hospitable environment to flourish. Low pH, high chlorine or high ozone levels can likewise degrade the underside of your spa cover. Since the cover is so near to the spa, it takes in the chemistry of the spa. Clean, clear and sanitary water is the very best environment to prevent stinky spa covers. (Sorry but this is simply BS) The truth is the spaces in the foam are nearly laboratory conditions for growing mold and mildew. Your spa chemistry is not going to stop that.
• Not Cleaned/ Conditioned. For outside spa covers, unless your back deck is covered or your spa is in a gazebo, you have sun, rain, pollen, dust, contamination, and animals to contend with. If you have a partial roofing system, that can be even worse than no roofing at all, if an overhanging eave drains water onto the spa cover. Clean and condition a spa cover 2-4 times each year, so that it always looks excellent, and is secured from the aspects. Again, this truly isn’t going to stop the mold and mildew from growing inside a foam cover. But it will help your spa dealership pay their bills.
Fix Your Hot Tub Cover!
• Remove to Safe Location: This initial step may appear apparent, however you need a great location to allow the cover to sit undisturbed from pets, wild animals, and winds. It ought to be a warm location if possible, or a dry indoor place with low humidity can also be utilized.
• Deodorize & Disinfect: You might not need to do both, it’s finest to be as mild as possible. Do not use home cleaning products on your spa cover, strange chemicals can wind up in your spa water. Carefully tidy all exterior surface areas with spa cover cleaner, and permit the panels to dry.
• Remove the Panels: Again, this must be prevented if possible, because the panels might end up being harmed throughout elimination or cleansing. But if you determine that there is something slimy inside, you can generally unzip and eliminate the panel for a cleaning inside and out.
How often does your spa dealer expect you to do all this? If your swim spa is secured from many sun and rain, two times per year. If it’s exposed it should be 3-4 times each year. Let that sink in a minute.
Much better Choice
The simplest remedy for a smelly swim spa cover is to just purchase a various type of swim spa cover A foul-smelling swim spa cover merely indicates that your cover is handling wetness, and things are starting to grow! Swim Spa Covers from SpaCap.com that doesn’t use foam but has sealed air chambers instead will avoid giving the mold and mildew a location to grow in the first place.